(radix) -- operators '#' and '&', e.g.:
'#sin(1)' was equal '0' -- there was a zero from '#' and then
it was multipied by 'sin(1)'
the parser didn't check whether Big::FromString() has actually
read a proper value -- the method Big::FromString() didn't have
something to report such a situation
fixed: Big::FromString() when the base is 10, the method reads the scientific
part only if such a part it correctly supplied, e.g:
'1234e10', '1234e+10', '1234e-5'
previous '1234e' was treated as: '1234e0' (now parsing stops on 'e' and
the 'e' can be parsed by other parsers, e.g. the mathematical
parser -- now in the parser would be: '1234e' = '1234 * e' = '3354,3597...' )
added: to Int::FromString(): parameter 'const char ** after_source = 0'
if exists it's pointing at the end of the parsed string
added: to UInt::FromString(), Int::FromString(), Big::FromString():
parameter 'bool * value_read = 0' - (if exists) tells
whether something has actually been read (at least one digit)
added: the parser checks itself for the operators for changing the base
(operators '#' and '&')
changed: in the parser: the form with operators '#' and '&' is as follows:
[-|+][#|&]numeric_value
previous was: [-|+][#|&][-|+]numeric_value
removed: Big::FromString() this method doesn't longer recognize operators
for changing the base ('#' and '&')
changed: in the parser: the short form of multiplication has the same
priority as the normal multiplication, e.g.:
'2x^3' = 2 * (x^3)
previous the priority was greater than powering priority
previous: '2x^3' = (2*x) ^ 3
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@113 e52654a7-88a9-db11-a3e9-0013d4bc506e
to make division first and then mutliplication -- the result is more
accurate especially when x is: 90,180,270 or 360
added: global template functions in ttmath.h:
ValueType GradToRad(const ValueType & x, ErrorCode * err = 0)
ValueType RadToGrad(const ValueType & x, ErrorCode * err = 0)
ValueType DegToGrad(const ValueType & x, ErrorCode * err = 0)
ValueType DegToGrad(const ValueType & d, const ValueType & m,
const ValueType & s, ErrorCode * err = 0)
ValueType GradToDeg(const ValueType & x, ErrorCode * err = 0)
added: Parser::SetDegRadGrad(int angle) - 0 deg, 1 rad (default), 2 grad
this affects following functions (in the parser only): sin, cos, tan, cot,
asin, acos, atan, acot
added: functions to the parser: gradtorad(grad), radtograd(rad), degtograd(deg),
degtograd(d,m,s), gradtodeg(grad)
removed: Big::Ln() and Big::Log() some old info was removed
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@110 e52654a7-88a9-db11-a3e9-0013d4bc506e
it's using PowInt() only when pow.exponent is in range (-man*TTMATH_BITS_PER_UINT; 0]
previously the powering 'hung' on an input like this: "(1+ 1e-10000) ^ 10e100000000"
(the was 10e100000000 iterations in PowInt())
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@108 e52654a7-88a9-db11-a3e9-0013d4bc506e
didn't correctly set the exponent (when the mantisses had different size -
when 'man' was different from 'another_man')
this had impact on operator= too
sample:
Big<2,3> a = 100;
Big<3,5> b;
b = a; // b had a wrong value
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@106 e52654a7-88a9-db11-a3e9-0013d4bc506e
changed: the size of built-in variables (constants) in ttmathbig.h
now they consist of 256 32bit words
macro TTMATH_BUILTIN_VARIABLES_SIZE is equal: 256u on a 32bit platform and 128ul on a 64bit platform
added: macro CONSTANTSGENERATOR which is useful for generating constants
(it's used by 'gen' program in 'constgen' directory)
after declaring this macro the methods: ExpSurrounding0() and LnSurrounding1() will be public visible
and the inner loop can do more iterations than TTMATH_ARITHMETIC_MAX_LOOP
changed: in methods: ExpSurrounding0() and LnSurrounding1() - the way of comparising with the last word
(now we're comparing not with the last state but with a state from a few words back)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@105 e52654a7-88a9-db11-a3e9-0013d4bc506e
fixed: Big::Add incorrectly rounded 'this' when both exponents were equal
it caused that sometimes when adding a zero the result has changed
this had impact among other things on FromString() method
"0,8" had different binary representation from "0,80"
changed: renamed: Big::PowUInt(UInt<pow_size> pow) -> Big::Pow(UInt<pow_size> pow)
it returns 2 when there is: 0^0
changed: renamed: Big::PowInt(Int<pow_size> pow) -> Big::Pow(Int<pow_size> pow)
it returns 2 when there is: 0^0 or 0^(-something)
changed: renamed: Big::PowBUInt() -> PowUInt(), Big::PowBInt() -> Big::PowInt()
they return 2 when the arguments are incorrect (like above)
changed: UInt::SetBitInWord(uint & value, uint bit) is taking the first argument by a reference now,
the specific bit is set in the 'value' and the method returns the last state of the bit (zero or one)
added: UInt::GetBit(uint bit_index) - returning the state of the specific bit
changed: UInt::SetBit(uint bit_index) - it's using TTMATH_ASSERT now
changed: Big::Mod2() - it's using mantissa.GetBit() now
added: Big::operator=(double) and Big::Big(double)
added: TTMATH_ASSERT somewhere in ttmathuint64.h
added: UInt::Pow(UInt<value_size> pow) and Int::Pow(Int<value_size> pow)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@104 e52654a7-88a9-db11-a3e9-0013d4bc506e
UInt::FindLeadingBitInWord, UInt::SetBitInWord
fixed: UInt::Div() didn't return a correct result when the divisor was equal 1
there was an error in UInt::DivInt() - when the divisor was 1 it returned
zero and the carry was set
this error was from the beginning of the TTMath library
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@103 e52654a7-88a9-db11-a3e9-0013d4bc506e
fixed: UInt::FindLeadingBitInWord(x) didn't correctly return result -1 when the x was 0
the mistake made by Thomas Braby, it was not in the 0.8.2 release
changed: tests: we do not test for lahf/sahf instructions now (in 64bit code)
we don't use these instructions
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@97 e52654a7-88a9-db11-a3e9-0013d4bc506e
the proper carry, (when 'bits' was greater than or equal to 'value_size')
this had impact on Rcl() and Rcr(), they also returned the wrong carry
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@85 e52654a7-88a9-db11-a3e9-0013d4bc506e
they are much faster than UInt::Rcl2(1,c) and Rcr2(1,c)
changed: UInt::Rcl() and UInt::Rcr()
we don't longer make the things with moving a half in the left and a half in the right
we simply use Rcl2_one() and Rcl2() /Rcr2_one() and Rcr2()/
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@84 e52654a7-88a9-db11-a3e9-0013d4bc506e
(much faster now)
changed: asm code in: UInt::Rcl2, UInt::Rcr2 (32 and 64bit)
previous versions of Rcl2 and Rcr2 had O(n2) complexity,
now they have O(n) and are much faster
changed: now we do not use LAHF and SAHF instructions (both in 32 and 64 bit code)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@83 e52654a7-88a9-db11-a3e9-0013d4bc506e
32 and 64 bits, much faster now
added: tests for UInt::AddInt
fixed: tests: test_lahf() returned incorrect value for 32bit platform
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@82 e52654a7-88a9-db11-a3e9-0013d4bc506e
there were used 'lahf' and 'sahf' instructions
probably they are supported in a new version of GCC
with '-msahf' option but GCC 4.2.1 has no such option
at the moment I'm using opcodes:
lahf -> 9f
sahf -> 9e
Warning! these instructions are not on all 64bit processors
from: http://gcc.gnu.org/onlinedocs/gcc/i386-and-x86_002d64-Options.html
"Early Intel CPUs with Intel 64 lacked LAHF and SAHF instructions supported
by AMD64 until introduction of Pentium 4 G1 step in December 2005."
changed: UInt::Add on 64bit platform
changed: UInt::Add on 32bit platform (a little)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@80 e52654a7-88a9-db11-a3e9-0013d4bc506e
which is pointing at the end of the parsing string
added: initial import of tests: testing UInt::Add method
(not finished)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@79 e52654a7-88a9-db11-a3e9-0013d4bc506e
the changes which were made in revision 60 and 63
(I forgot to change the info there)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@67 e52654a7-88a9-db11-a3e9-0013d4bc506e
the method do not check whether there is a zero or not now
(even if there's a zero the method can set a sign bit)
I changed this due to some prior errors
(errors corrected in revision 17, 49 and 58)
added: in Big::MulInt() checking whether the values are zeros
and if so the metdhod returns zero immediately
removed: file TODO (I didn't use it)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@66 e52654a7-88a9-db11-a3e9-0013d4bc506e
remove the -2 state
added: 'remove_trailing_zeroes' in Big::ToString()
it's either true or false
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@63 e52654a7-88a9-db11-a3e9-0013d4bc506e
e.g. '5y', (it's used only if the second parameter
is a variable or function)
changed: variables and functions are case-sensitive now
added: variables and functions can have underline characters
in their names
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@61 e52654a7-88a9-db11-a3e9-0013d4bc506e
for converting from another kind of a Big class
added: to the parser: avg(), sum()
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@56 e52654a7-88a9-db11-a3e9-0013d4bc506e
there was SetSign() used when the value was not
defined, and also was a small mistake when the mantissa
was equal one word (on 32bit platforms)
added: uint Big::ToDouble(double&) - converting into double
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@49 e52654a7-88a9-db11-a3e9-0013d4bc506e
Big::ChangeSign()
added: ASinh(), ACosh(), ATanh() /ATgh()/, ACoth() /ACtgh()/
and to the parser as well
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@35 e52654a7-88a9-db11-a3e9-0013d4bc506e
changed: UInt::Rcl(uint c=0) and UInt::Rcr(uint c=0) into
UInt::Rcl2(uint bits, uint c) and UInt::Rcr2(uint bits, uint c)
now they can move more than one bit and they are only private
fixed: UInt::Rcl(uint bits, uint c) and UInt::Rcr(uint bits, uint c)
didn't correctly return a carry if the 'bits' were equal
to 'value_size*TTMATH_BITS_PER_UINT'
changed: UInt::Rcl(uint bits, uint c) and UInt::Rcr(uint bits, uint c)
into UInt::Rcl(uint bits, uint c=0) and
UInt::Rcr(uint bits, uint c=0)
they are faster now when the bits is greater than a half of
the TTMATH_BITS_PER_UINT
changed: UInt::CompensationToLeft() it's faster now
changed: more small changes where there were UInt::Rcl(uint c=0) and
UInt::Rcr(uint c=0) used
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@34 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: Big::MulUInt(uint)
changed: Big::MulInt(sint)
added: Big::ToUInt(uint &)
changed: Big::ToInt(sint&)
changed: Factorial() it uses Big::MulUInt() at the beginning
(faster now especially more on a 32bit platform)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@33 e52654a7-88a9-db11-a3e9-0013d4bc506e
(when 'this' was negative)
added: Root(x; index) (and to the parser as well)
added: macro: TTMATH_PRERELEASE_VER (can be either zero or one)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@32 e52654a7-88a9-db11-a3e9-0013d4bc506e
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
(user-defined variables/functions in the mathematical parser)
added: into the parser: logical operators: > < >= <= == != && ||
added: into the parser: logical functions: and() or() not() if()
changed: a method for looking for a mathematical operator
(there's the operators table now)
added: ErrorCode::err_unknown_operator when the parser couldn't read an operator
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@23 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: Big::Sgn - the 'sign' from the value (-1,0,1)
added: global functions Mod and Sgn too
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@19 e52654a7-88a9-db11-a3e9-0013d4bc506e