added a new math operator: assign
now we can assign a value to a variable (not finished yet)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@1137 e52654a7-88a9-db11-a3e9-0013d4bc506e
oper.erase(oper.begin() + oper.size() - 1)
because oper.pop_back() is available from c++11
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@1049 e52654a7-88a9-db11-a3e9-0013d4bc506e
to allow use of the STL port
(reported on the ttmath forum by Sebo)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@1047 e52654a7-88a9-db11-a3e9-0013d4bc506e
there is incorrectly use || operator (the && shoud be used)
reported by heby on the ttmath forum
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@450 e52654a7-88a9-db11-a3e9-0013d4bc506e
initializing coefficients used when calculating the gamma (or factorial) function
this speed up the next calculations
you don't have to call this method explicitly
these coefficients will be calculated when needed
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@324 e52654a7-88a9-db11-a3e9-0013d4bc506e
uint UInt::FromUInt(uint64_t n)
uint Int::FromInt(int64_t n)
void Big::FromUInt(uint64_t n)
void Big::FromInt(int64_t n)
and appropriate constructors and operators
added: TTMATH_FORCEASM macro
asm version of the library is available by default only for:
x86 and amd64 platforms and for Microsoft Visual and GCC compilers,
but you can force using asm version (the same asm as for Microsoft Visual)
by defining TTMATH_FORCEASM macro
you have to be sure that your compiler accept such an asm format
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@311 e52654a7-88a9-db11-a3e9-0013d4bc506e
if defined then the library does not use wide characters
(wchar_t, std::wstring, ...) this is a workaround for some compilers
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@294 e52654a7-88a9-db11-a3e9-0013d4bc506e
after the comma operator
this was not correctly calculated - sometimes gives unexpected results,
e.g. 0.5/2/2=0.125 (only one bit in the mantissa) gives 0.1 as the result
changed: cosmetic changes in Big::Add()
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@283 e52654a7-88a9-db11-a3e9-0013d4bc506e
operator ^ (powering) is right-associative:
sample: 2^3^4 is equal 2^(3^4) and it is: 2.41e+24
previously was: 2^3^4 = (2^3)^4 = 4096
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@273 e52654a7-88a9-db11-a3e9-0013d4bc506e
those characters were skipped
(this bug was introduced in 0.9.0)
added: to Big::ToString() - additional rounding when conv.base_round is used
if the value is not an integer we calculate how many valid digits there are
after the comma operator (in conv.base radix) and then we skipped the rest
digits, after skipping the base-rounding is made
this helps to print values which have some last clear bits in the mantissa
consider this 32 bit value:
(binary)0.00011100001010001111010111000000000
which has mantissa equal: (binary)11100001010001111010111000000000 (32 bits)
previous the ToString() method gave: (decimal)0.10999999[...]
now we have: (decimal)0.11
added: Parser::SetSmallToZero(bool zero) (default true)
if true then the parser changes small values into zero
small value means:
- if the mantissa of the value consists only of one, two or three set bits
- and these bits are next to each other
- and the exponent is smaller than about 2 times the number of bits from the mantissa
this helps to correctly calculate expressions such as: "0.80-3*0.34+0.22"
now the parser gives zero (previous there was a value very closed to zero)
added: UInt::FindLowestBit(uint & table_id, uint & index)
/temporary version - asm version is missing /
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@256 e52654a7-88a9-db11-a3e9-0013d4bc506e
those characters were skipped
(this bug was introduced in 0.9.0)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@255 e52654a7-88a9-db11-a3e9-0013d4bc506e
this method returns true is something was calculated
(at least one mathematical operator was used or a function or variable)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@207 e52654a7-88a9-db11-a3e9-0013d4bc506e
didn't want to compile
moved: UInt<>::SkipWhiteCharacters() to Misc::SkipWhiteCharacters()
UInt<>::CharToDigit() to Misc::CharToDigit()
UInt<>::DigitToChar() to Misc::DigitToChar()
removed: Parser::CharToDigit() - was duplicated (it's the same as Misc::CharToDigit())
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@198 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: wide characters can be used simultaneously with ascii characters
now we have two kind of methods: one for ascii characters and the other for wide characters
e.g.
void UInt::ToString(std::string & result)
void UInt::ToString(std::wstring & result)
previous was only one:
void UInt::ToString(tt_string & result)
and the 'tt_string' was a typedef to either std::string or std::wstring
and it was a little misleading to a user (he has to know what the tt_string is)
added: file: ttmathmisc.h some useful functions
changed: classes: ExceptionInfo, ReferenceError and RuntimeError are used only with ascii characters
removed: macros: TTMATH_USE_WCHAR, TTMATH_TEXT()
removed: typedefs: tt_char, tt_string, tt_ostringstream, tt_ostream, tt_istream
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@193 e52654a7-88a9-db11-a3e9-0013d4bc506e
* added: gamma() function to the parser
* added: Big::IsInteger() method
returns true if the value is integer
* added: CGamma<ValueType> class
is used with Gamma() and Factorial() in multithreaded environment
* changed: Factorial() is using the Gamma() function now
* removed: Parser<>::SetFactorialMax() method
the factorial() is such a fast now that we don't need the method longer
* removed: ErrorCode::err_too_big_factorial
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@178 e52654a7-88a9-db11-a3e9-0013d4bc506e
wide characters are used when macro TTMATH_USE_WCHAR is defined
this macro is defined automatically when there is macro UNICODE or _UNICODE defined
some types have been changed
char -> tt_char
std::string -> tt_string
std::ostringstream -> tt_ostringstream
std::ostream -> tt_ostream
std::istream -> tt_istream
normally tt_char is equal char but when you are using wide characters then tt_char will be wchar_t (and so on)
(all typedef's are in ttmathtypes.h)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@177 e52654a7-88a9-db11-a3e9-0013d4bc506e
changed: some cosmetic changes to get rid of warnings generated by
MS Visual 2008 when warning level is 4
changed: names of labels in asm code: p to ttmath_loop, end to ttmath_end
p2 to ttmath_loop2
Robert Muir reported that there was a confict with boost::end
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@156 e52654a7-88a9-db11-a3e9-0013d4bc506e
and the result was sometimes very big (even greater than x)
fixed: global function Mod(x) didn't set an ErrorCode object
fixed: global function Round() didn't test a carry
now it sets ErrorCode object
changed: function Sin(x) to Sin(x, ErrorCode * err=0)
when x was very big the function returns zero
now it sets ErrorCode object to err_overflow
and the result is undefined
the same is to Cos() function
changed: PrepareSin(x) is using Big::Mod() now when reducing 2PI period
should be a little accurate especially on a very big 'x'
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@143 e52654a7-88a9-db11-a3e9-0013d4bc506e
(radix) -- operators '#' and '&', e.g.:
'#sin(1)' was equal '0' -- there was a zero from '#' and then
it was multipied by 'sin(1)'
the parser didn't check whether Big::FromString() has actually
read a proper value -- the method Big::FromString() didn't have
something to report such a situation
fixed: Big::FromString() when the base is 10, the method reads the scientific
part only if such a part it correctly supplied, e.g:
'1234e10', '1234e+10', '1234e-5'
previous '1234e' was treated as: '1234e0' (now parsing stops on 'e' and
the 'e' can be parsed by other parsers, e.g. the mathematical
parser -- now in the parser would be: '1234e' = '1234 * e' = '3354,3597...' )
added: to Int::FromString(): parameter 'const char ** after_source = 0'
if exists it's pointing at the end of the parsed string
added: to UInt::FromString(), Int::FromString(), Big::FromString():
parameter 'bool * value_read = 0' - (if exists) tells
whether something has actually been read (at least one digit)
added: the parser checks itself for the operators for changing the base
(operators '#' and '&')
changed: in the parser: the form with operators '#' and '&' is as follows:
[-|+][#|&]numeric_value
previous was: [-|+][#|&][-|+]numeric_value
removed: Big::FromString() this method doesn't longer recognize operators
for changing the base ('#' and '&')
changed: in the parser: the short form of multiplication has the same
priority as the normal multiplication, e.g.:
'2x^3' = 2 * (x^3)
previous the priority was greater than powering priority
previous: '2x^3' = (2*x) ^ 3
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@113 e52654a7-88a9-db11-a3e9-0013d4bc506e
to make division first and then mutliplication -- the result is more
accurate especially when x is: 90,180,270 or 360
added: global template functions in ttmath.h:
ValueType GradToRad(const ValueType & x, ErrorCode * err = 0)
ValueType RadToGrad(const ValueType & x, ErrorCode * err = 0)
ValueType DegToGrad(const ValueType & x, ErrorCode * err = 0)
ValueType DegToGrad(const ValueType & d, const ValueType & m,
const ValueType & s, ErrorCode * err = 0)
ValueType GradToDeg(const ValueType & x, ErrorCode * err = 0)
added: Parser::SetDegRadGrad(int angle) - 0 deg, 1 rad (default), 2 grad
this affects following functions (in the parser only): sin, cos, tan, cot,
asin, acos, atan, acot
added: functions to the parser: gradtorad(grad), radtograd(rad), degtograd(deg),
degtograd(d,m,s), gradtodeg(grad)
removed: Big::Ln() and Big::Log() some old info was removed
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@110 e52654a7-88a9-db11-a3e9-0013d4bc506e
e.g. '5y', (it's used only if the second parameter
is a variable or function)
changed: variables and functions are case-sensitive now
added: variables and functions can have underline characters
in their names
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@61 e52654a7-88a9-db11-a3e9-0013d4bc506e
for converting from another kind of a Big class
added: to the parser: avg(), sum()
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@56 e52654a7-88a9-db11-a3e9-0013d4bc506e
Big::ChangeSign()
added: ASinh(), ACosh(), ATanh() /ATgh()/, ACoth() /ACtgh()/
and to the parser as well
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@35 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: Big::MulUInt(uint)
changed: Big::MulInt(sint)
added: Big::ToUInt(uint &)
changed: Big::ToInt(sint&)
changed: Factorial() it uses Big::MulUInt() at the beginning
(faster now especially more on a 32bit platform)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@33 e52654a7-88a9-db11-a3e9-0013d4bc506e
(when 'this' was negative)
added: Root(x; index) (and to the parser as well)
added: macro: TTMATH_PRERELEASE_VER (can be either zero or one)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@32 e52654a7-88a9-db11-a3e9-0013d4bc506e
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
(user-defined variables/functions in the mathematical parser)
added: into the parser: logical operators: > < >= <= == != && ||
added: into the parser: logical functions: and() or() not() if()
changed: a method for looking for a mathematical operator
(there's the operators table now)
added: ErrorCode::err_unknown_operator when the parser couldn't read an operator
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@23 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: Big::Sgn - the 'sign' from the value (-1,0,1)
added: global functions Mod and Sgn too
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@19 e52654a7-88a9-db11-a3e9-0013d4bc506e
fixed: bad sizes in tables in some 'Set...' methods in the Big class
fixed: Big::FromInt(Int<int_size> value) - the sign must be set at the end because SetSign
checks whether there is zero and depends on it sets the sign or not
(this was the stupid error which causes sometimes the errors 'overflow during printing')
fixed: Big::SetMin - the sign must be set at the and
changed: Big::Pow can use the reference now (the problem was actually with the Big::FromInt)
added: a namespace 'auxiliaryfunctions' (in ttmath.h)
added: ATan - arc tan, ACTan - arc ctan
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@17 e52654a7-88a9-db11-a3e9-0013d4bc506e
added: UInt::SetFromTable for 64bit code (now the support for 64bit
platforms seems to be completed)
added: asin - arc sin, acos - arc cos
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@16 e52654a7-88a9-db11-a3e9-0013d4bc506e
added UInt::AddInt and UInt::SubInt
changed UInt::AddOne and UInt::SubOne (much faster now)
added UInt::SetBitInWord
changed UInt::SetBit (much faster now)
UInt::AddTwoUints renamed to UInt::AddTwoInts
UInt::FindLeadingBit32 renamed to UInt::FindLeadingBitInWord
added UInt::SetBitInWord
UInt::Mul64 renamed to UInt::MulTwoWords
UInt::Div64 renamed to UInt::DivTwoWords
and more small changes in UInt type
start adding support for Amd64 (not finished yet) (added ttmathuint64.h)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@12 e52654a7-88a9-db11-a3e9-0013d4bc506e
changed kind of templates in ttmath.h (template<class ValueType> is now)
added TTMATH_RELEASE macro
added TTMATH_ prefix into macros
changed multiplication in UInt type (now we can use both algorithm in the same time)
added ExceptionInfo, ReferenceError and RuntimeError classes
now TTMATH_ASSERT throws another type of object
added TTMATH_REFERENCE_ASSERT (it is instead of MATHTT_THIS_ASSERT)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@3 e52654a7-88a9-db11-a3e9-0013d4bc506e
Tomasz Sowa