added: DegToDeg(deg, min, sec), DegToRad(deg), DegToRad(deg, min, sec),
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
2007-03-29 00:27:57 +02:00
|
|
|
TTMath - a bignum library for C++
|
2007-01-21 21:02:44 +01:00
|
|
|
|
added: DegToDeg(deg, min, sec), DegToRad(deg), DegToRad(deg, min, sec),
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
2007-03-29 00:27:57 +02:00
|
|
|
TTMath is a small library which allows one to perform arithmetic operations
|
|
|
|
with big unsigned integer, big signed integer and big floating point
|
|
|
|
numbers. It provides standard mathematical operations like adding,
|
|
|
|
subtracting, multiplying, dividing etc. With the library also goes
|
|
|
|
a mathematical parser which helps you solving input formulas read directly
|
|
|
|
from a user.
|
2007-01-21 21:02:44 +01:00
|
|
|
|
2008-06-18 02:33:05 +02:00
|
|
|
TTMath is developed under the BSD licence which means that it is free
|
|
|
|
for both personal and commercial use.
|
|
|
|
|
|
|
|
The library has some technical limitations:
|
|
|
|
* there are only two platforms that are supported: x86 and x86_64,
|
|
|
|
* you can use this library only with the C++ programming language.
|
added: DegToDeg(deg, min, sec), DegToRad(deg), DegToRad(deg, min, sec),
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
2007-03-29 00:27:57 +02:00
|
|
|
|
|
|
|
The main goal of the library is to allow one to use big values in the same
|
|
|
|
way as the standard types like int, float, etc. It does not need to be
|
|
|
|
compiled first because the whole library is written as the C++ templates.
|
|
|
|
This means only C++ developers can use this library and one thing they have
|
2008-06-18 02:33:05 +02:00
|
|
|
to do is to use 'include' directive of the preprocessor. How big the
|
added: DegToDeg(deg, min, sec), DegToRad(deg), DegToRad(deg, min, sec),
RadToDeg(rad), Ceil(x), Floor(x), Sqrt(x), Sinh(x), Cosh(x),
Tanh(x) /Tgh(x)/, Coth(x) /Ctgh(x)/
changed: class Objects in ttmathobjects.h has been completely rewritten, we can
change the names of user-defined variables or functions, and the names are
case-sensitive now
added: class History which is used in functions which take a lot of time
during calculating e.g. Factorial(x)
added: Tg(x) a wrapper for Tan(x)
changed: CTan(x) is Cot(x) now
added: Ctg(x) a wrapper for Cot(x)
added: ATg(x) a wrapper for ATan(x)
changed: ACTan(x) is ACot(x) now
added: ACtg(x) a wrapper for ACot(x)
added: UInt::PrintTable() (for debugging etc.)
changed: the methods Big::SetPi() Big::SetE() and Big::SetLn2() have been
rewritten, now they have 128 32bit words (it's about 1232 valid
decimal digits)
fixed: previous values from Big::SetPi() Big::SetE() and Big::SetLn2() were
not too much accurate (last 2-3 words were wrong)
added: Big::SetLn10() (128 32bit words as well)
added: macro: TTMATH_BUILTIN_VARIABLES_SIZE which is equal 128u on 32bit
platforms and 64ul on 64bit platforms (128/2=64)
added: macros: TTMATH_PLATFORM32 and TTMATH_PLATFORM64
changed: a small optimisation in UInt::Mul2Big()
added: at the end of ttmath.h: #include "ttmathparser.h"
this is for convenience for a programmer, he can only use #include
with ttmath.h even if he uses the parser
added: to samples: big.cpp, parser.cpp
fixed: constructor Big::Big(uint) - it was wrong because
it was using the method Big::FromInt(sint) which could produce wrong
values (if the 'uint' couldn't correctly be casted into the 'sint')
added: Big::FromUInt(uint)
changed: Big::FromInt(sint), Big::SetOne(), renamed Big::SetDotOne() into
Big::Set05()
(they are a little faster now)
added: Big::operator=(uint)
changed: in 64bit mode: constructor: Big::Big(int)
added: in 64bit mode: constructor: Big::Big(unsigned int),
operators: Big::operator=(signed int) and Big::operator=(unsigned int)
(these operators and the constructor take a 32bit value)
deleted: the word 'virtual' from destructors: UInt, Int, Big
(types in this library are not projected to be base-classes for
another ones derived from them)
changed: UInt::operator=(uint), UInt::UInt(uint), Int::operator=(sint), Int::Int(sint)
added: UInt::FromUInt(uint), UInt::operator=(sint), UInt::UInt(sint),
Int::FromInt(sint), Int::operator=(uint), Int::Int(uint),
Int::operator==(const Int<>&), Int::operator!=(const Int<>&)
added: in 64bit mode: UInt::operator=(unsigned int), UInt::UInt(unsigned int),
UInt::operator=(signed int), UInt::UInt(signed int)
(these operators and the constructors take a 32bit value)
added: in 64bit mode: Int::operator=(signed int), Int::Int(signed int),
Int::operator=(unsigned int), Int::Int(unsigned int)
(these operators and the constructors take a 32bit value)
git-svn-id: svn://ttmath.org/publicrep/ttmath/trunk@25 e52654a7-88a9-db11-a3e9-0013d4bc506e
2007-03-29 00:27:57 +02:00
|
|
|
values can be is set directly in the source code by the programmer.
|
|
|
|
|
2008-06-18 02:33:05 +02:00
|
|
|
Author: Tomasz Sowa <t.sowa@slimaczek.pl>
|
|
|
|
Project pages: http://ttmath.slimaczek.pl
|
|
|
|
http://sourceforge.net/projects/ttmath
|